Riveting HS skin

Allmost finished. I used Cherry max on the 407.

Riveting HS skin

Dimpled the HS skins and started riveting them.

Deburring, deburring and dimpling

Deburred the skin and skeleton. Primed the skin and dimpled the skeleton.

Finished drilling the HS skin

The HS skins are ready for deburring and priming.

More HS skin

Measured and started drilling the other side.

HS skin drilled

One skin drilled on. The other one is ready for drilling.

Right skin ready for drilling

Measured up all the rivet lines. Ready to start drilling on one skin.

Adjusted the skeleton in the jig

Measured up the skeleton in the jig and fastened it with clamps and long bolts. The tip flanges will be riveted into the tip ribs when the skins are on.

HS skeleton riveted together

Riveted together the HS skeleton and placed it in the jig.

HS ribs deburred and primed

Deburred an prmed the HS ribs.

HS ribs ready for priming

Drilled the ribs into yheir positions. Ribs are ready for priming and deburring.

HS skeleton

Started mounting the skeleton.

Fluted HS ribs

Measured rivet lines and rivet positions on the ribs. Fluted the ribs and made the extentions on the tip ribs so they fit with the skin.